On Aug 12, 2017, at 2:06 PM, Jesse Allain
Hello,
I have my patchbay mostly wired and for some reason I can't figure out how to get the 1/8" TRS of my macbook out to 2 channels of my adc patchbay. My patchbay has only TrS connections for each channel. I tried twisting the red wires from both cables and soldering to the Tip l, twisting the blacks for ring and twisting the shields for sleeve And it sounds phasey and weird.
Thanks in advance...
Jesse allain
--
Access Coordinator
Certified Audio Engineer, SBE
Member, Audio Engineering Society
Ashburnham Westminster
Community Access Television
www.awcatv.org
Hey Jesse,
The tip (hot) of your 1/8” TRS from your Mac goes to the tip of the left channel on your patchbay. The ring ( low line) of your 1/8” TRS from your Mac goes to the tip of the right channel on your patchbay. The ground can go to either channel or both. Now you will have a correct stereo signal.
Sincerely,
Bobby Hickey
817-926-9535
Visit Bob Land Below
Mr. Patchbay Website: http://www.misterpatchbay.com/
Mix resume: http://www.misterpatchbay.com/patchbays/mixing-resume.html
GaugeCraft: http://www.gaugecraft.com/
On Aug 12, 2017, at 9:58 PM, Jesse Allain
Awesome, thank you so much. You are a great source of knowledge and I really appreciate your help with setting up my studio. I got the equipment you suggested and it works great.
Very Cool. Glad to help.
