The Patchbay Blog

On Sep 20, 2017, at 9:31 PM, Jeffrey ***** <*******@gmail.com> wrote:

Hello! I am writing you because I have a couple of questions regarding an ADC 48 point patchbay with a punch block.

I am working on this project on my own and do not have much experience with this type of equipment. I have been doing my research and for the life of me can not get a clear answer on the type of punch tool that would need fort this patchbay.

Do you sell punchtools for an ADC patchbay with the punchblock that has the normaling and TRS connections?

If you do not sell them and it is not to much trouble, could you inform me on what I should be looking for?

Much appreciated

Jeff

hey Jeff,

No problem dude. I do not sell the punch tools. I only give them away when someone buys a punch type patchbay.
What you need is the ADC Q115:
https://www.markertek.com/product/adc-q115/adc-commscope-q115-qcp-manual-punch-tool
There is also the QB-2 for more money but the Q115 works just fine:
https://www.markertek.com/product/qb2/adc-commscope-qb-2-qcp-impact-punchdown-tool-for-qpc-ii-propatch-panels
Here is how to use your ADC punch tool:
https://misterpatchbay.com/patchbays/movies-how-to-wire-your-patchbay.html


Sincerely,
Bobby Hickey
817-926-9535
Visit Bob Land Below
Mr. Patchbay Website: http://www.misterpatchbay.com/
Mix resume: http://www.misterpatchbay.com/patchbays/mixing-resume.html
GaugeCraft: http://www.gaugecraft.com/
October 2017
September 2017
August 2017
April 2017
February 2017
January 2017
September 2016
May 2016
April 2016
December 2015
October 2015
August 2015
March 2015
November 2014
June 2014
May 2014
March 2014
February 2014
January 2014
December 2013
November 2013
June 2013
March 2013
February 2013
December 2012
September 2012
June 2012
May 2012
October 2011
July 2011
June 2011
April 2011